Replacing a RAID cache card

User this information for instructions on how to replace a RAID cache card.

Note

• For additional information and notes about installing adapters, see Installing an adapter.
• For information about the support RAID adapters and cache cards, see Supported RAID adapters and Supported RAID cache cards.

To replace an RAID cache card, complete the following steps:

1. Align the new cache card with the slot on the adapter and lower it into the connector.
2. Press on the cache card firmly until it is securely seated into the connector on the adapter.
3. Reinstall the adapter in the I/O book (see Installing an adapter).
4. Close the adapter retention lever to secure the adapter in place.
5. Reconnect the cables to the adapter and connect the flash power module cable to the cache card.
6. Reinstall the I/O book in the server.
7. Reconnect the power cord and any cables that you removed.
8. Turn on the peripheral devices and the server.