Removing a 1400-watt or 900-watt hot-swap power supply

Use this information for instructions on how to remove a 1400-watt or 900-watt hot-swap power supply.

When you remove or install a hot-swap power supply, observe the following precautions.

Statement 5

CAUTION

The power control button on the device and the power switch on the power supply do not turn off the electrical current supplied to the device. The device also might have more than one power cord. To remove all electrical current from the device, ensure that all power cords are disconnected from the power source.

Statement 8

CAUTION

Never remove the cover on a power supply or any part that has the following label attached.

Hazardous voltage, current, and energy levels are present inside any component that has this label attached. There are no serviceable parts inside these components. If you suspect a problem with one of these parts, contact a service technician.

To remove a hot-swap power supply, complete the following steps:

1. Before you begin, read Safety and Installation guidelines .
2. Removing a 1400-watt hot-swap power supply.
   1. Press and hold the orange release tab to the left. Grasp the handle and pull the power supply out of the server.
      
      
      
   2. Set the power supply aside.
   3. Go to step 4.
3. Removing a 900-watt hot-swap power supply.
   1. Press and hold the orange release tab to the left. Grasp the power supply handle and pull the power supply out of the server.
      
      
      

      Note

      You only need to remove the spacer if you are removing all of the 750-watt -48 V to -60 V dc power supplies or 900-watt power supplies and installing 1400-watt power supplies.
   2. Set the power supply spacer aside.
4. If you are instructed to return the power supply, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.