Skip to main content

Removing a RAID adapter flash power module from the storage book

Use this information for instructions on how to remove a RAID flash power module from the storage book.

Note
  • You can install up to two RAID flash power modules in the storage book.

When you install multiple RAID adapters that come with flash power modules, install them in the slots inside the storage book. To install a RAID adapter flash power module in the storage book, complete the following steps:

  1. Read the safety information and installation guidelines, see Safety and Installation guidelines.
  2. Turn off the server and peripheral devices and disconnect all power cords and external devices.
  3. Remove the storage book (see Removing the storage book).
  4. Disconnect the cables from the bottom drive backplane.
  5. Open the retention clip on the flash power module slot. Press the blue tab outward to open the retention clip.
  6. Rotate the retention clip all the way up.
  7. Disconnect the flash power module cable from the adapter.
  8. Remove the flash power module from the slot and set it aside.

If you have other devices to install or remove, do so now. Otherwise, go to Completing the installation.