Skip to main content

Removing the front I/O panel (USB/video) assembly

Use this information for instructions on how to remove the front I/O panel.

To remove the front I/O panel, complete the following steps.

  1. Before you begin, read Safety and Installation guidelines .
  2. Turn off the server (see Turning off the server) and all attached peripheral devices. Disconnect all power cords; then, disconnect all external cables as necessary to replace the device.
  3. Remove the storage book from the server (see Removing the storage book).
  4. Disconnect the USB/video cables from the storage book board.
  5. Press the release latch on the right side of the storage book and place two fingers in the finger holes and carefully slide the front I/O panel forward toward the front of the storage bookand remove it.

    Illustration of removing the front I/O panel
  6. If you are instructed to return the front I/O panel assembly, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.