Removing a RAID cache card
User this information for instructions on how to remove a RAID cache card.
Note
For additional information and notes about the adapters, see Installing an adapter.
To remove a RAID cache card, complete the following steps:
- Before you begin, read Safety and Installation guidelines .
- Turn off the server (see Turning off the server) and all attached peripheral devices. Disconnect all power cords; then, disconnect all external cables as necessary to replace the device.
- Follow the removal instructions for the I/O book where the failed cache card is installed.
- Disconnect any cables from the adapter and the cache card.
- Lift up the adapter retention lever that secures the adapter.
- Carefully grasp the adapter by its top edge or upper corners, and pull the adapter from the connector.
- Grasp the cache card and pull it out of the connector on the adapter.
- If you are instructed to return the cache card, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.
Give documentation feedback