Skip to main content

Replacing the front I/O panel (USB/video) assembly

Use this information for instructions on how to replace the front I/O panel.

To install the front I/O panel, complete the following steps.

  1. Route USB/video cables through the cable slot on the air baffle and hold the cables in place.
  2. From the front of the storage book, align the assembly with the slot on the storage book and slide the front I/O panel into the storage book until it is seated firmly.

    Illustration of replacing the front I/O panel
  3. Reconnect the USB/video cables to the storage book board.
    Note
    Make sure that cables are installed correctly by using the keys on the connectors and the keys on the cables. Incorrect installation of the cables can damage the storage book.
  4. Reinstall the storage book into the server.
  5. Reconnect the power cords and any cables that you removed.
  6. Turn on the peripheral devices and the server.