Skip to main content

Removing the hard disk drive backplate

Use this information to remove the hard disk drive backplate.

Before you remove the hard disk drive backplate, complete the following steps:
  1. Read Safety and Installation guidelines.
  2. If the compute node is installed in an Lenovo NeXtScale n1200 Enclosure, remove it (see Removing a compute node from a chassis for instructions).
  3. Carefully lay the compute node on a flat, static-protective surface, orienting the compute node with the bezel pointing toward you.

To remove the hard disk drive backplate, complete the following steps.

Figure 1. Removal of HDD backplate for 2.5-inch and 1.8-inch respectively
Graphic illustrating removal of HDD backplate

Graphic illustrating removal of HDD backplate

  1. Remove the cover (see Removing the compute node cover).
  2. Unlatch and slide out slightly the easy-swap hard disk drive and hard disk drive bay filler, (just enough to disengage the drive or filler).
  3. Unlatch the release latch and lift out the hard disk drive backplate.
If you are instructed to return the hard disk drive backplate, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.