Skip to main content

Removing the operator information panel

Use this information to remove the operator information panel.

Before you remove the operator information panel, read Safety and Installation guidelines.

To remove the operator information panel, complete the following steps.

  1. Remove the screw of the operator information panel. Place it in a safe place.
    Figure 1. Screw removal
    Screw removal
  2. Pull out the connector from the system board.
    Figure 2. Connector pull out
    Connector pull out
  3. Carefully pull the operator information panel outward a little to make a space for removal.
    Figure 3. Pull the operator information panel
    Pull the operator information panel
  4. Lift the operator information panel from the compute node.
    Figure 4. Lift the operator information panel
    Lift the operator information panel

If you are instructed to return the operator information panel, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.