Install the EIA brackets to the chassis
Follow instructions in this section to install the EIA brackets to the chassis.
About this task
To avoid potential danger, make sure to read and follow the safety information.
Attention
Read Installation Guidelines and Safety inspection checklist to make sure that you work safely.
Procedure
- Repeat the same step to secure the right EIA bracket to the right of the chassis.Figure 1. Installation of the EIA brackets
After you finish
- Install the chassis to the rack (see Install the chassis to the rack).
- Reinstall each PSU slot with a PSU or PSU filler (see Install a hot-swap power supply and Installation of a PSU filler).
- Reinstall the nodes into the chassis (see Install a node to the chassis).
- Proceed to complete the parts replacement (see Complete the parts replacement).
Demo video
Give documentation feedback