Skip to main content

Six 2.5-inch-drive model

Use this section to understand how to route cables for six 2.5-inch-drive model.

Six 2.5-inch-drive model

  • Six 2.5-inch hot-swap SAS/SATA backplane

    Figure 1. Six 2.5-inch hot-swap SAS/SATA backplane
    Six 2.5-inch hot-swap SAS/SATA backplane
    Table 1. Components on the six 2.5-inch hot-swap SAS/SATA backplane
    1 Ambient sensor cable3 Backplane power cable
    2 miscellaneous signal cable 

  • Six 2.5-inch drive cable routing

    Figure 2. Six 2.5-inch drive cable routing
    Six 2.5-inch drive cable routing
    Table 2. Components on the six 2.5-inch drive cable routing
    1 6 Internal cable management basket3 SATA 1 connector
    2 5 SAS/SATA cable4 SATA 2 connector

  • Six 2.5-inch drive with hardware RAID cable routing

    Figure 3. Six 2.5-inch drive with hardware RAID cable routing
    Six 2.5-inch drive with hardware RAID cable routing
    Note
    Route the 1 SAS/SATA cable as shown in the illustration to avoid cable slack.
    Table 3. Components on the six 2.5-inch drive with hardware RAID cable routing
    1 4 SAS/SATA cable3 RAID adapter
    2 5 Internal cable management basket