Change the cable management arm for installation tothe other side of the rack

See this section to learn how to change the CMA for installation to the other side of the rack.

To install the cable management arm on the opposite side, complete the following steps:

1. Press the release latch.
2. Pull the mounting clip up to remove the cable management arm out of the shelf.
3. Press the release latch of the other mounting clip.
4. Pull the mounting clip up to remove it.
   Figure 1. Mounting clip removal
   
   
5. Align the mounting clip hole with the hinge pin; then, push the mounting clip to insert it.
6. Turn and orient the cable management arm as illustrated.
7. Align the other mounting clip hole with the hinge pin and push it to insert the cable management arm to the shelf.
   Figure 2. Mounting clip installation