Rear view
The rear of the server provides access to several components, including the power supplies and Ethernet port.
Rear view of ThinkEdge SE350 V2, DC power input
Figure 1. Rear view of ThinkEdge SE350 V2, DC power input
1 Threaded studs for grounding | 3 PMB status LED |
2 RJ-45 RS-232 serial console connector | 4 DC power inputs (two 6-pins 12V-48V power connectors) |
Figure 2. Rear view of ThinkEdge SE350 V2, AC power input
1 RJ-45 RS-232 serial console connector | 3 PMB status LED |
2 AC power input (3-pins 120V-240 VAC) |
Power connectors
Connect DC or AC power source directly or external power adapters to these connectors. Make sure the power cords are connected properly. For more information, see Install a power adapter.
RJ-45 RS-232 serial console connector without LED
Connect a external RJ-45 serial COMM console cable to this connector.
PMB status LED
For more information about this LED, see PMB status LED.
Threaded studs for grounding
Connect the grounding wires to these lugs.
Install I/O fillers
Install the I/O fillers when the connectors are not in use. The connectors could be damaged without proper protection of the fillers.
Figure 3. Rear I/O fillers
1 Power-connector filler (x2) | 2 RJ-45 filler (x1) |
Give documentation feedback