LOM packages
The following illustrations show the wireless enabled LOM package, 10G SFP+ LOM package, and 10G BASE-T LOM Package.
Depending on the server configuration, connect one of the LOM packages to the LOM module connector on the system board (see System-board connectors).
Wireless enabled LOM package
Wireless enabled LOM package enables the wireless function of the server. The connector on the package is designed for M.2 WLAN/LTE wireless adapter. There are two types of the wireless adapter, both are installed in the same method. For more information, see Install the M.2 WLAN/LTE wireless adapter.
Figure 1. Wireless enabled LOM package
![Wireless enabled LOM package](se350_033-200.png)
![Wireless enabled LOM package](se350_033-200.png)
1 M.2 WLAN/LTE wireless connector | 2 Service-only connector |
Note
The service-only connector is available on some models and reserved for service only.
10G SFP+ LOM package
Figure 2. 10G SFP+ LOM package
![10G SFP+ LOM package](se350_034-200.png)
![10G SFP+ LOM package](se350_034-200.png)
10G BASE-T LOM Package
Figure 3. 10G BASE-T LOM Package
![10G BASE-T LOM Package](se350_130-200.png)
![10G BASE-T LOM Package](se350_130-200.png)
Give documentation feedback