Skip to main content

Technical specifications

Summary of the technical specifications of server. Depending on the model, some features might not be available, or some specifications might not apply.

Processor
Supports AMD® EPYCTM 8004 series processors.
  • Scalable up to 64 cores
  • Designed for LGA 4844 (SP6) socket
  • Supports 96 lanes of high speed I/O
  • Thermal Design Power (TDP): up to 200 watts
  • Configurable Thermal Design Power (cTDP): up to 225 watts

For a list of supported processors, see: Lenovo ServerProven website.

Memory

See Memory module installation rules and order for detailed information about memory configuration and setup.

  • Capacity
    • Minimum: 16 GB
    • Maximum: 768 GB
  • Memory module types:
    • TruDDR5 4800MHz RDIMM
    • TruDDR5 5600MHz RDIMM
  • Slots: 6 dual inline memory module (DIMM) connectors

For a list of supported memory modules, see: Lenovo ServerProven website.

M.2 Drive

Supports up to two SATA/NVMe M.2 drives.

  • Capacity
    • 128 GB
    • 240 GB
    • 480 GB
    • 960 GB
Note

Depending on the M.2 backplane installed, SE455 V3 supports different RAID configurations.

  • With SATA/x4 NVMe M.2 backplane (ThinkSystem M.2 SATA/x4 NVMe 2-Bay Enablement Kit) installed:

    • The non-RAID configuration of M.2 drives supports NVMe only.

    • The RAID configuration of M.2 drives is supported with one of the following RAID adapters:

      • ThinkSystem RAID 5350-8i PCIe 12Gb Adapter: SATA
      • ThinkSystem RAID 540-8i PCIe Gen4 12Gb Adapter: NVMe

  • With SATA/NVMe M.2 backplane (ThinkSystem M.2 RAID B540i-2i SATA/NVMe Adapter) installed:

    • The non-RAID configuration of M.2 drives supports SATA/NVMe.

    • The RAID configuration of M.2 drives supports SATA/NVMe.

For a list of supported M.2 drives, see: Lenovo ServerProven website.

Storage expansion

Front drives

  • Up to four 2.5-inch SAS/SATA/NVMe hot-swap drives

    Note
    When SED encryption is enabled, it is necessary to power cycle the system after installing an SED; without power cycling, the SED will not be recognized by the host OS.

Internal drives (optional)

  • Up to four 2.5-inch SAS/SATA/NVMe non-hot-swap drives

Note
RAID adapter/HBA is required for SAS drives.
Expansion slots

Supported expansion slots vary by configuration.

  • M.2 drive bay (optional): support up to two M.2 SATA/NVMe drives

    • Slot 1 / M.2 bay 0

    • Slot 2 / M.2 bay 1

    Note
    RAID adapter/HBA is required for M.2 SATA drives.

  • PCIe slots: all PCIe slots support 75W

    Note
    Performance may degrade when a x16 PCIe adapter is installed in a x8 lane PCIe slot.

    • PCIe riser 1

      • Slot 3: x16 (Gen5 x16 lanes)

      • Slot 4: x16 (Gen4 x8 lanes)

      • Slot 5: x16 (Gen4 x8 lanes)

      Note
      • When the serial port module is installed, Slot 5 is not supported.
      • When a double-wide GPU is installed in Slot 3, Slot 4 is not supported.

    • PCIe riser 2 (optional)

      • Slot 6: x16 (Gen4 x8 lanes)

      • Slot 7: x16 (Gen5 x16 lanes)

      • Slot 8: x16 (Gen4 x8 lanes)

      Note
      • Slot 6 and Slot 8 are not supported in the following configurations:
        • Front SATA drive backplane and internal NVMe drive backplane connect to the system board
        • Front NVMe drive backplane and internal NVMe drive backplane connect to the system board
      • When a double-wide GPU is installed in Slot 7, Slot 6 is not supported.

  • OCP module slot

    • Slot 9: Gen5 x16 lanes (with NC-SI support)

Graphics processing unit (GPU) and accelerator
Supports one of the following:

  • Up to two double-wide GPUs (Slot 3 and Slot 7)

  • Up to six single-wide GPUs/accelerators

For a list of supported GPUs, see: Lenovo ServerProven website.

Integrated functions and I/O connectors
  • Lenovo XClarity Controller (XCC), which provides service processor control and monitoring functions, video controller, and remote keyboard, video, mouse, and remote drive capabilities.

  • Front I/O connectors

    • One XCC system management port (10/100/1000 Mbps RJ-45) on the front to connect to a systems-management network. This RJ-45 connector is dedicated to the Lenovo XClarity Controller functions.

    • A group of two or four Ethernet connectors on OCP module

    • One USB 2.0 Type-A connector with Lenovo XClarity Controller management

    • Two USB 3.2 Gen 1 (5 Gbps) Type-A connectors

    • One USB 3.2 Gen 1 (5 Gbps) Type-C connector with display support

    • One external diagnostics connector

Network

  • OCP 3.0 module: Supports one OCP 3.0 Ethernet network adapter in Slot 9 (with NC-SI support)

  • Supports up to six PCIe Ethernet adapters

RAID adapter

  • ThinkSystem RAID 5350-8i PCIe 12Gb Adapter: RAID 0, 1, 10, 5

  • ThinkSystem RAID 540-8i PCIe Gen4 12Gb Adapter: RAID 0, 1, 10

  • ThinkSystem RAID 940-8i 4GB Flash PCIe Gen4 12Gb Adapter: RAID 0, 1, 10, 5, 50, 6, 60

Important
Do not enable the SED management of RAID adapter, and do not connect encryption-enabled SEDs to RAID adapters. The SED management of RAID adapter might conflict with system AK management.
Note

Depending on the M.2 backplane installed, SE455 V3 supports different RAID configurations.

  • With SATA/x4 NVMe M.2 backplane (ThinkSystem M.2 SATA/x4 NVMe 2-Bay Enablement Kit) installed:

    • The non-RAID configuration of M.2 drives supports NVMe only.

    • The RAID configuration of M.2 drives is supported with one of the following RAID adapters:

      • ThinkSystem RAID 5350-8i PCIe 12Gb Adapter: SATA
      • ThinkSystem RAID 540-8i PCIe Gen4 12Gb Adapter: NVMe

  • With SATA/NVMe M.2 backplane (ThinkSystem M.2 RAID B540i-2i SATA/NVMe Adapter) installed:

    • The non-RAID configuration of M.2 drives supports SATA/NVMe.

    • The RAID configuration of M.2 drives supports SATA/NVMe.

Host bus adapter

  • ThinkSystem 440-8i SAS/SATA PCIe Gen4 12Gb HBA

  • ThinkSystem 4350-8i SAS/SATA 12Gb HBA

System fan

  • Five 60 mm x 60 mm x 56 mm dual-rotor fans

Electrical input
Supports up to two units of power supplies with N+N redundancy. Following is the list of supported types:

  • 1800-watt Platinum, input power 230 VAC

  • 1100-watt Titanium, input power 230 VAC

  • 1100-watt Platinum, input power 115-230 VAC

  • 1100-watt -48V DC power supply unit

Important
Power supplies installed in the server must be with the same power rating, wattage or level.
Minimal configuration for debugging

  • One processor

  • One DDR5 DRAM memory modules in slot 3 (DIMM3)

  • System board

  • Firmware and RoT security module

  • One power supply unit in PSU bay 1 (PSU1)

  • One M.2 boot drive (if OS is needed for debugging)

  • Five system fans

Operating systems
Supported and certified operating systems:

  • Microsoft Windows Server

  • VMware ESXi

  • Red Hat Enterprise Linux

  • SUSE Linux Enterprise Server

References: