Skip to main content

Remove the bezel

Use this information to remove the bezel.

Before you remove the bezel, complete the following steps:

  1. Read Installation Guidelines to ensure that you work safely.

    Note
    Several different types of bezel can be installed in the compute node, all are removed and installed in a similar manner. The bezel shown in the illustrations might differ slightly from the bezel installed on your compute node.

To remove the bezel, complete the following steps:

Figure 1. Bezel removal
Graphic illustrating removal of the bezel

  1. If any drives or drive bay fillers are installed, remove them (see Remove a 2.5-inch hot-swap drive for instructions).
  2. Release the handle and rotate to the fully open position.
  3. Press up on the inside top of the bezel; then, rotate the top edge of the bezel away from the compute node.
  4. Lift the bezel from the compute node.

If you are instructed to return the bezel, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.

Demo video

Watch the procedure on YouTube