System-board connectors for cable routing
The following illustrations show the internal connectors on the system board that are used for internal cable routing.
Figure 1. System-board connectors
| 1 Front VGA connector | 12 SGPIO1 connector |
| 2 Processor power connector | 13 Fan 3 connector |
| 3 Backplane power connector | 14 SATA connector 5 |
| 4 CFF RAID power connector | 15 SATA connector 4 |
| 5 Power distribution board signal connector | 16 Fan 4 connector |
| 6 Fan 1 connector | 17 Front I/O module connector |
| 7 Fan 2 connector | 18 Front USB 3.0/2.0 header (DCI support) |
| 8 System power connector | 19 M.2 signal connector |
| 9 SATA connector 6 | 20 M.2 power connector |
| 10 SATA connector 7 | 21 Intrusion switch connector |
| 11 SATA connector 0-3 | 22 SlimSAS x8 connector |
Give documentation feedback