Skip to main content

Mirroring mode installation order

Mirroring mode provides full memory redundancy while reducing the total system memory capacity in half. Memory channels are grouped in pairs with each channel receiving the same data. If a failure occurs, the memory controller switches from the DIMMs on the primary channel to the DIMMs on the backup channel. The DIMM installation order for memory mirroring varies based on the number of processors and DIMMs installed in the server.

In mirroring mode, each memory module in a pair must be identical in size and architecture. The channels are grouped in pairs with each channel receiving the same data. One channel is used as a backup of the other, which provides redundancy.

Follow the rules below when installing memory modules in mirroring mode:
  • All memory modules to be installed must be of the same Lenovo part number.

  • Partial Memory Mirroring is a sub-function of memory mirroring. It requires following the memory installation order of memory mirroring mode.

See the specific section below for the DIMM installation order depending on whether the server is equipped with Compute Complex Neptune Core Module.

Mirroring mode of servers without Compute Complex Neptune Core Module

The following table shows the DIMM installation order for mirroring mode when only one processor (processor 1) is installed on servers without Compute Complex Neptune Core Module.

Table 1. Mirroring mode with one processor
Total DIMMsProcessor 1
16151413121110987654321
8 DIMMs161412107531
16 DIMMs16151413121110987654321

The following table shows the DIMM installation order for mirroring mode when two processors are installed on servers without Compute Complex Neptune Core Module.

Table 2. Mirroring mode with two processors
Total DIMMsProcessor 1
16151413121110987654321
16 DIMMs161412107531
32 DIMMs16151413121110987654321
Total DIMMsProcessor 2
32313029282726252423222120191817
16 DIMMs3230282623211917
32 DIMMs32313029282726252423222120191817
Note
  • All DIMM configurations in mirroring mode support the Sub NUMA Clustering (SNC) feature, which can be enabled via UEFI.

  • Supported DIMMs are subject to the following restrictions:
    DIMM configurationSlot No.Supported DIMMs
    8-DIMM (1P) or 16-DIMM (2P)016/32/48/64/96/128 GB RDIMMs, 32/64 GB MRDIMMs, or 256 GB 3DS RDIMMs
    1N/A
    16-DIMM (1P) or 32-DIMM (2P)032 GB (2Rx8), 64 GB, 96 GB, or 128 GB RDIMMs or 256 GB 3DS RDIMMs
    1Same as slot 0
    1P: one processor; 2P: two processors

Mirroring mode of servers with Compute Complex Neptune Core Module

The following table shows the DIMM installation order for mirroring mode of servers with Compute Complex Neptune Core Module.

Total DIMMsProcessor 2Processor 1
3230282623211917161412107531
16 DIMMs3230282623211917161412107531
Note
  • All DIMM configurations in mirroring mode support the Sub NUMA Clustering (SNC) feature, which can be enabled via UEFI.

  • Supported DIMMs are subject to the following restrictions:
    DIMM configurationSlot No.Supported DIMMs
    16-DIMM016/32/48/64/96/128 GB RDIMMs, 32/64 GB MRDIMMs, or 256 GB 3DS RDIMMs