Front + rear backplanes: 16 x 2.5" SAS/SATA + 4 x 2.5" SAS/SATA

This topic provides cable routing information for the front 16 x 2.5-inch SAS/SATA + rear 4 x 2.5-inch SAS/SATA configuration with riser 5, OCP interposer cards, one rear 16i RAID/HBA adapter, and one rear 8i RAID/HBA adapter.

To connect riser 5 cables, see Riser 5 cage.

To connect cables to the front and rear OCP interposer cards, see OCP interposer cards.

Connections between connectors: 1 ↔ 1, 2 ↔ 2, 3 ↔ 3, ... n ↔ n

Figure 1. Front backplane cable routing		Figure 2. Rear backplane cable routing
From	To	From	To
1Backplane 1: SAS	116i adapter Gen 4: C0 Gen 3: C0C1	1Backplane 4: SAS	18i adapter: C0
2Backplane 2: SAS	216i adapter Gen 4: C1 Gen 3: C2C3	2Backplane 4: PWR	2Onboard: 7mm power connector