32i RAID/HBA adapter
The following shows the cable connections for the front (16 x 2.5-inch SAS/SATA + 8 x 2.5-inch Gen 4 AnyBay) configuration with one 32i RAID/HBA adapter.
To connect the processor interconnection cable when two processors are installed, see Processor interconnection cable routing.
Connections between connectors: 1 ↔ 1, 2 ↔ 2, 3 ↔ 3, ... n ↔ n
SAS/SATA cable routing
Figure 1. SAS/SATA cable routing to 32i adapter
| From | To |
|---|---|
| 1 Backplane 1: SAS | 1 32i adapter: C0 |
| 2 Backplane 2: SAS | 2 32i adapter: C1 |
| 3 Backplane 3: SAS | 3 32i adapter: C2 |
NVMe cable routing
Figure 2. Cable routing when two processors installed  | Figure 3. Cable routing when one processor installed  | ||
| From | To | From | To |
| 1 Backplane 3: NVMe 0-1 | 1 Onboard: PCIe 6 | 1 Backplane 3: NVMe 0-1 | 1 Onboard: PCIe 2 |
| 2 Backplane 3: NVMe 2-3 | 2 Onboard: PCIe 8 | 2 Backplane 3: NVMe 2-3 | 2 Onboard: PCIe 1 |
| 3 Backplane 3: NVMe 4-5 | 3 Onboard: PCIe 9 | 3 Backplane 3: NVMe 4-5 | 3 Onboard: PCIe 9 |
| 4 Backplane 3: NVMe 6-7 | 4 Onboard: PCIe 10, 11 | 4 Backplane 3: NVMe 6-7 | 4 Onboard: PCIe 10, 11 |
Give documentation feedback