32i RAID/HBA adapter + Retimer card
The following shows the cable connections for the front (16 x 2.5-inch SAS/SATA + 8 x 2.5-inch Gen 5 AnyBay) configuration with one 32i RAID/HBA adapter and one retimer card when two processors are installed.
To connect the processor interconnection cable when two processors are installed, see Processor interconnection cable routing.
Connections between connectors: 1 ↔ 1, 2 ↔ 2, 3 ↔ 3, ... n ↔ n
Figure 1. SAS/SATA cable routing | Figure 2. NVMe cable routing | ||
From | To | From | To |
1 Backplane 1: SAS | 1 32i adapter: C0 | 1 Backplane 3: NVMe 0-1 | 1 Retimer card: C0 |
2 Backplane 2: SAS | 2 32i adapter: C1 | 2 Backplane 3: NVMe 2-3 | 2 Retimer card: C1 |
3 Backplane 3: SAS | 3 32i adapter: C2 | 3 Backplane 3: NVMe 4-5 | 3 Onboard: PCIe 9 |
4 Backplane 3: NVMe 6-7 | 4 Onboard: PCIe 10, 11 |
Give documentation feedback