8i/16i RAID/HBA adapter
The following shows the cable connections for the 8 x 2.5-inch AnyBay configuration with one 8i/16i RAID/HBA adapter.
To connect the processor interconnection cable when two processors are installed, see Processor interconnection cable routing.
Connections between connectors: 1 ↔ 1, 2 ↔ 2, 3 ↔ 3, ... n ↔ n
SAS/SATA cable routing
Figure 1. SAS/SATA cable routing to 8i/16i RAID/HBA adapter
From | To |
|---|---|
| 1Backplane 1: SAS | 18i/16i adapter
|
NVMe cable routing
Figure 2. Cable routing when two processors installed  | Figure 3. Cable routing when one processor installed  | ||
| From | To | From | To |
| 1Backplane 1: NVMe 0-1 | 1Onboard: PCIe 5 | 1Backplane 1: NVMe 0-1 | 1Onboard: PCIe 2 |
| 2Backplane 1: NVMe 2-3 | 2Onboard: PCIe 7 | 2Backplane 1: NVMe 2-3 | 2Onboard: PCIe 1 |
| 3Backplane 1: NVMe 4-5 | 3Onboard: PCIe 6 | 3Backplane 1: NVMe 4-5 | 3Onboard: PCIe 9 |
| 4Backplane 1: NVMe 6-7 | 4Onboard: PCIe 8 | 4Backplane 1: NVMe 6-7 | 4Onboard: PCIe 10, 11 |
Give documentation feedback