Onboard connectors + 16i RAID/HBA adapter

The following shows the cable connections for the front (8 x 2.5-inch SAS/SATA + 8 x 2.5-inch AnyBay) configuration with one 16i RAID/HBA adapter.

To connect the processor interconnection cable when two processors are installed, see Processor interconnection cable routing.

Connections between connectors: 1 ↔ 1, 2 ↔ 2, 3 ↔ 3, ... n ↔ n

SAS/SATA cable routing​

Figure 1. SAS/SATA cable routing to 16i adapter

From	To
1Backplane 1: SAS	116i adapter Gen 4: C0 Gen 3: C0C1
2Backplane 2: SAS	216i adapter Gen 4: C1 Gen 3: C2C3

NVMe cable routing​

Figure 2. Cable routing when two processors installed		Figure 3. Cable routing when one processor installed
From	To	From	To
1Backplane 2: NVMe 0-1	1Onboard: PCIe 6	1Backplane 2: NVMe 0-1	1Onboard: PCIe 2
2Backplane 2: NVMe 2-3	2Onboard: PCIe 8	2Backplane 2: NVMe 2-3	2Onboard: PCIe 1
3Backplane 2: NVMe 4-5	3Onboard: PCIe 9	3Backplane 2: NVMe 4-5	3Onboard: PCIe 9
4Backplane 2: NVMe 6-7	4Onboard: PCIe 10, 11	4Backplane 2: NVMe 6-7	4Onboard: PCIe 10, 11