Complete the parts replacement

To complete the parts replacement, do the following:

1. Ensure that all components have been reassembled correctly and that no tools or loose screws are left inside your server.

2. Properly route and secure the cables in the server. Refer to the cable connecting and routing information for each component.

3. Reinstall the air baffle if you have removed it. See Install the air baffle.

   Attention

   For proper cooling and airflow, reinstall the air baffle before you turn on the server. Operating the server with the air baffle removed might damage server components.

4. Reinstall the top cover. See Install the top cover.

5. If the sever was installed in a rack, reinstall the server into the rack. See Install the server to rack.

6. Reconnect the power cords and any cables that you removed.

7. Power on the server and any peripheral devices. See Power on the server.

8. Update the server configuration.

   • Download and install the latest device drivers: Lenovo Data Center Support.

   • Update the system firmware. See Update the firmware.

   • Update the UEFI configuration. See UEFI manual for ThinkSystem server.

   • Reconfigure the disk arrays if you have installed or removed a hot-swap drive or a RAID adapter. See Lenovo XClarity Provisioning Manager portal page for the LXPM documentation compatible with your server.