12 x 3.5-inch front drive bays (AnyBay)
This section provides cable routing information for the server model with 12 x 3.5-inch AnyBay front drive bays.
| Configuration | Mid/Rear BP | Storage controller | ||
| Qty. | Type | Qty. | Type | |
| Config. 1 | 1 | SFF 16i RAID/HBA | ||
| Config. 2 | 1 | SFF 16i RAID (Tri-Mode) | ||
| Config. 3 | 1 | Rear: 4 x 3.5'' SAS/SATA | 1 | SFF 16i RAID/HBA |
| Config. 4 | 1 | Rear: 4 x 3.5'' SAS/SATA | 2 | SFF 8i HBA + SFF 16i RAID/HBA |
| Config. 5 | 2 | Mid: 4 x 3.5'' SAS/SATA Rear: 4 x 3.5'' SAS/SATA | 1 | SFF 32i RAID |
Depending on your server configurations, refer to one of the following sections for cable routing information.
Configuration 1 – 2:
BP 1: 12 x 3.5'' AnyBay BP
| Config. | Front BP | System board | Storage controller |
| SFF 16i RAID/HBA | |||
| 1 | NVMe 0–1 | PCIe 1, PCIe 2 | |
| NVMe 2–3 | PCIe 3 | ||
| NVMe 4–5 | PCIe 4, PCIe 5 | ||
| NVMe 6–7 | PCIe 6 | ||
| NVMe 8–9 | PCIe 7 | ||
| NVMe 10–11 | PCIe 8 | ||
| SAS 0, SAS 1 | Gen 4: C 0 Gen3: C 0/ C 1 | ||
| SAS 2 | C 1 | ||
| 2 | SAS 0, SAS 1 | Gen 4: C 0 Gen3: C 0/ C 1 | |
| SAS 2 | Gen 4: C 1 Gen3: C 2/ C 3 |
Configuration 3 – 4:
BP 1: 12 x 3.5'' AnyBay BP
BP 4: 4 x 3.5'' SAS/SATA BP
| Config. | Front BP | Rear BP | System board | Storage controller | |
| SFF 16i RAID/HBA | SFF 8i RAID | ||||
| 3 | NVMe 0–1 | PCIe 1, PCIe 2 | |||
| NVMe 2–3 | PCIe 3 | ||||
| NVMe 4–5 | PCIe 4, PCIe 5 | ||||
| NVMe 6–7 | PCIe 6 | ||||
| NVMe 8–9 | PCIe 7 | ||||
| NVMe 10–11 | PCIe 8 | ||||
| SAS 0, SAS 1 | Gen 4: C 0 Gen3: C 0/ C 1 | ||||
| SAS 2 | BP 4: SAS | Gen 4: C 1 Gen3: C 2/C 3 | |||
| 4 | NVMe 0–1 | PCIe 1, PCIe 2 | |||
| NVMe 2–3 | PCIe 3 | ||||
| NVMe 4–5 | PCIe 4, PCIe 5 | ||||
| NVMe 6–7 | PCIe 6 | ||||
| NVMe 8–9 | PCIe 7 | ||||
| NVMe 10–11 | PCIe 8 | ||||
| SAS 0, SAS 1 | Gen 4: C 0 Gen3: C 1 | ||||
| SAS 2 | Gen 4: C 1 Gen3: C 0 | ||||
| BP 4: SAS | Gen 4: C 0 Gen3: C 0 | ||||
Configuration 5:
BP 1: 12 x 3.5'' AnyBay BP
BP 4: 4 x 3.5'' SAS/SATA BP
BP 5: 4 x 3.5'' SAS/SATA BP
| Config. | Front BP | Rear BP | System board | Storage controller |
| SFF 32i RAID | ||||
| 5 | NVMe 0–1 | PCIe 1, PCIe 2 | ||
| NVMe 2–3 | PCIe 3 | |||
| NVMe 4–5 | PCIe 4, PCIe 5 | |||
| NVMe 6–7 | PCIe 6 | |||
| NVMe 8–9 | PCIe 7 | |||
| NVMe 10–11 | PCIe 8 | |||
| SAS 0, SAS 1 | C 0 | |||
| SAS 2 | BP 4: SAS | C 1 | ||
| BP 5: SAS | C 2 |
Example
Figure 1. Configuration 5
Give documentation feedback