Skip to main content

Remove a network adapter

Follow instructions in this section to remove a network adapter from the front I/O expansion board or the front I/O expansion board module.

About this task

Attention

Procedure

  1. Prepare your server.
    1. Remove the top cover. See Remove the top cover.
  2. Unfasten the screw that secures the network adapter to the chassis; then, lift it out of the chassis.
    Figure 1. Removing the network adapter
    Removing the network adapter
After you finish

If you are instructed to return the component or optional device, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.

Demo video

Watch the procedure on YouTube