Remove the serial port module

Follow instructions in this section to remove the serial port module from the rear PCIe riser.

Procedure

1. Prepare your server.
   1. Remove the top cover. See Remove the top cover.
   2. Remove the PCIe riser. See Remove a PCIe riser .
2. Remove the serial port module.
   1. Remove the serial port cable from the cable clip.
   2. Open the retention latch on the PCIe riser.
   3. Unfasten the screw that secures the serial port module to the PCIe riser.
   4. Remove the serial port module from the PCIe riser.
      Figure 1. Removing the serial port module