Skip to main content

Jumper settings

The jumper settings for Product_name components are listed

Important
  • Before you move any jumpers, power off the server; then, disconnect all power cords and external cables. Do not open your server or attempt any repair before reading and understanding the following information:
  • Any system-board switch or jumper block that is not shown in the illustrations in this document is reserved

GPU adapters​

The following table lists the required jumper settings for the GPU adapters.

Table 1. PCIe adapters jumper settings
 Jumper numberJumper functionRequired setting

PCIe expansion cage 1

(right)

J11Card inversion stateInverted

PCIe expansion cage 2

GPU 2

(middle)

J11Card inversion stateInverted

I/O expansion cage​

The following table lists the required jumper settings for the I/O expansion cage card.

Table 2. I/O expansion cage jumper settings
Jumper numberJumper numberJumper functionRequired setting

I/O expansion cage

(right)

J11Card inversion stateDefault