Skip to main content

Install an M.2 drive

Follow instructions in this section to install an M.2 drive.

About this task

Attention
  • Read Installation Guidelines and Safety inspection checklist to ensure that you work safely.
  • Touch the static-protective package that contains the component to any unpainted metal surface on the server; then, remove it from the package and place it on a static-protective surface.

Procedure

  1. Locate the connector you want to install the M.2 drive on the M.2 backplane.
  2. If needed, adjust the position of the M.2 drive retainer so that it is compatible with the size of the M.2 drive you are installing.
  3. Slide the M.2 retainer backward to ensure enough space for the M.2 drive installation.
  4. Install the M.2 drive.
    1. Hold the M.2 drive at an angle, and insert it into the M.2 slot.
    2. Lower the M.2 drive.
    3. Slide the retainer toward the M.2 drive to secure it in place.
      Figure 1. M.2 drive installation
      M.2 drive installation

After you finish

Complete the parts replacement. See Complete the parts replacement.

Demo video

Watch the procedure on YouTube