Skip to main content

Install the front fan control board

Follow instructions in this section to install the front fan control board. The procedure must be executed by a trained technician.

About this task

Attention
  • Read Installation Guidelines and Safety inspection checklist to ensure that you work safely.
  • Touch the static-protective package that contains the component to any unpainted metal surface on the server; then, remove it from the package and place it on a static-protective surface.

Procedure

  1. Lower the front fan control board into the system shuttle, and fasten the two screws to secure it.
    Figure 1. Front fan control board installation
    Front fan control board installation
  2. Connect the cable to the front fan control board. See Fan control board cable routing.

After you finish

  1. Reinstall the air duct. See Install the air duct.
  2. Reinstall the front fans. See Install a hot-swap fan.
  3. Push the system shuttle fully into the chassis.
    1. Lift the two lock latches on both sides of the shuttle.
    2. Slide the shuttle into the chassis.
    3. Push the shuttle fully into the chassis.
    4. Rotate the two release levers until they lock into place.
    Figure 2. System shuttle installation
    System shuttle installation

    System shuttle installation
  4. Complete the parts replacement. See Complete the parts replacement.