Skip to main content

Install a front PCIe adapter

Follow instructions in this section to install a front PCIe adapter. The procedure must be executed by a trained technician.

About this task

Attention
  • Read Installation Guidelines and Safety inspection checklist to ensure that you work safely.
  • Touch the static-protective package that contains the component to any unpainted metal surface on the server; then, remove it from the package and place it on a static-protective surface.

Procedure

  1. Align the front PCIe adapter with the PCIe slot on the PCIe switch board; then, press the front PCIe adapter into the slot until it is fully seated.
  2. Fasten the screw to secure the front PCIe adapter.
    Note
    The PCIe adapter might look different from the illustration.
    Figure 1. Front PCIe adapter installation
    Front PCIe adapter installation
  3. Install the PCIe switch shuttle.
    1. Press the two blue release latches.
    2. Press the two lock latches on both sides of the PCIe switch shuttle.
    3. Push the PCIe switch shuttle into the 8U GPU shuttle until it stops.
    4. Rotate the two release levers until they lock into place.
      Figure 2. PCIe switch shuttle installation to 8U GPU shuttle
      PCIe switch shuttle installation to 8U GPU shuttle

After you finish

Complete the parts replacement. See Complete the parts replacement.