Skip to main content

Install the PCIe switch shuttle

Follow instructions in this section to install the PCIe switch shuttle. The procedure must be executed by a trained technician.

About this task

Attention
  • Read Installation Guidelines and Safety inspection checklist to ensure that you work safely.
  • Touch the static-protective package that contains the component to any unpainted metal surface on the server; then, remove it from the package and place it on a static-protective surface.
  • Anti-static gloves are recommended as a precaution while connecting cables to the PCIe switch board.

Procedure

  1. Align the PCIe switch shuttle with the opening in the front of the 8U GPU shuttle, and slide it into the 8U GPU shuttle until it snaps into place.
    Figure 1. PCIe switch shuttle installation to stop position
    PCIe switch shuttle installation to stop position
  2. Connect the cables to the PCIe switch board. See below for more information.
  3. Install the PCIe switch shuttle.
    1. Press the two blue release latches.
    2. Press the two lock latches on both sides of the PCIe switch shuttle.
    3. Push the PCIe switch shuttle into the 8U GPU shuttle until it stops.
    4. Rotate the two release levers until they lock into place.
      Figure 2. PCIe switch shuttle installation to 8U GPU shuttle
      PCIe switch shuttle installation to 8U GPU shuttle

After you finish

Complete the parts replacement. See Complete the parts replacement.