3 x AnyBay backplanes
Follow the instructions in this section to learn how to do cable routing for three AnyBay backplanes.
Note
- For more information about the power cable routing, see 2.5-inch drive backplane cable routing (server model with three PCIe risers).
- When routing the cables, ensure that all cables are routed appropriately through the cable guides and cable clips.
- Make sure to choose the cables based on the generation of RAID adapters that you plan to install:
- HL PCIe riser 1 and 3:
- Gen3 RAID/HBA adapters (9350-16i, 4350-16i, 9350-8i, 5350-8i, 4350-8i): Mini-SAS x4*2 to SlimSAS x8 cable
- Gen4 RAID/HBA adapters (940-32i, 940-16i, 540-16i, 440-16i, 940-8i, 540-8i, 440-8i): SlimSAS x8 to SlimSAS x8 cable
- FL PCIe riser 1 and 3:
- Gen4 RAID/HBA adapters (940-32i, 940-16i, 540-16i, 440-16i, 940-8i, 540-8i, 440-8i): SlimSAS x8 to SlimSAS x8 cable
- HL PCIe riser 2:
- Gen3 RAID/HBA adapters (9350-16i, 4350-16i, 9350-8i, 5350-8i, 4350-8i): Mini-SAS x4*2 to SlimSAS x8 cable
- Gen4 RAID/HBA adapters (940-16i, 540-16i, 440-16i, 940-8i, 540-8i, 440-8i): SlimSAS x8 to SlimSAS x8 cable
- HL PCIe riser 1 and 3:
This configuration contains the following storage controller combinations:
No RAID/HBA adapter
Note
The AnyBay backplanes are used as pure NVMe backplanes when no RAID/HBA adapters are installed.
| NVMe cable routing - backplane 1 | NVMe cable routing - backplane 2 |
|---|---|
 |  |
| NVMe cable routing - backplane 3 | |
 | |
| Cable | From | To | Cable length |
|---|---|---|---|
| 1 | Backplane 1: NVMe 0-1 | System board assembly: NVMe 10 connector | 420 mm |
| 2 | Backplane 1: NVMe 2-3 | System board assembly: NVMe 9 connector | 420 mm |
| 3 | Backplane 1: NVMe 4-5 | System board assembly: NVMe 1 connector | 150 mm |
| 4 | Backplane 1: NVMe 6-7 | System board assembly: NVMe 2 connector | 150 mm |
| 5 | Backplane 2: NVMe 0-1 | System board assembly: NVMe 3 connector | 150 mm |
| 6 | Backplane 2: NVMe 2-3 | System board assembly: NVMe 4 connector | 150 mm |
| 7 | Backplane 2: NVMe 4-5 | System board assembly: NVMe 5 connector | 150 mm |
| 8 | Backplane 2: NVMe 6-7 | System board assembly: NVMe 6 connector | 150 mm |
| 9 | Backplane 3: NVMe 0-1 | System board assembly: NVMe 7 connector | 150 mm |
| 10 | Backplane 3: NVMe 2-3 | System board assembly: NVMe 8 connector | 150 mm |
| 11 | Backplane 3: NVMe 4-5 | System board assembly: NVMe 12 connector | 420 mm |
| 12 | Backplane 3: NVMe 6-7 | System board assembly: NVMe 11 connector | 420 mm |
8i + 16i RAID/HBA adapter
Based on the location of the RAID/HBA adapter, select the corresponding routing path for SAS/SATA cable from the following table.
| SAS/SATA cable routing to PCIe riser 1 | SAS/SATA cable routing to PCIe riser 2 |
|---|---|
 |  |
| SAS/SATA cable routing to PCIe riser 3 | |
 | |
| Cable | From | To |
|---|---|---|
| 1 | Backplane 1: SAS/SATA | 16i adapter:
|
| 2 | Backplane 2: SAS/SATA | 16i adapter:
|
| 3 | Backplane 3: SAS/SATA | 8i adapter:
|
| NVMe cable routing - backplane 1 | NVMe cable routing - backplane 2 |
|---|---|
| |
| NVMe cable routing - backplane 3 | |
| |
| Cable | From | To | Cable length |
|---|---|---|---|
| 1 | Backplane 1: NVMe 0-1 | System board assembly: NVMe 10 connector | 420 mm |
| 2 | Backplane 1: NVMe 2-3 | System board assembly: NVMe 9 connector | 420 mm |
| 3 | Backplane 1: NVMe 4-5 | System board assembly: NVMe 1 connector | 150 mm |
| 4 | Backplane 1: NVMe 6-7 | System board assembly: NVMe 2 connector | 150 mm |
| 5 | Backplane 2: NVMe 0-1 | System board assembly: NVMe 3 connector | 150 mm |
| 6 | Backplane 2: NVMe 2-3 | System board assembly: NVMe 4 connector | 150 mm |
| 7 | Backplane 2: NVMe 4-5 | System board assembly: NVMe 5 connector | 150 mm |
| 8 | Backplane 2: NVMe 6-7 | System board assembly: NVMe 6 connector | 150 mm |
| 9 | Backplane 3: NVMe 0-1 | System board assembly: NVMe 7 connector | 150 mm |
| 10 | Backplane 3: NVMe 2-3 | System board assembly: NVMe 8 connector | 150 mm |
| 11 | Backplane 3: NVMe 4-5 | System board assembly: NVMe 12 connector | 420 mm |
| 12 | Backplane 3: NVMe 6-7 | System board assembly: NVMe 11 connector | 420 mm |
8i + 16i RAID adapter (Tri-mode)
Based on the location of the RAID adapter, select the corresponding routing path for SAS/SATA cable from the following table.
| SAS/SATA cable routing to PCIe riser 1 | SAS/SATA cable routing to PCIe riser 2 |
|---|---|
| |
| SAS/SATA cable routing to PCIe riser 3 | |
| |
| Cable | From | To |
|---|---|---|
| 1 | Backplane 1: SAS/SATA | 16i adapter: C0 |
| 2 | Backplane 2: SAS/SATA | 16i adapter: C1 |
| 3 | Backplane 3: SAS/SATA | 8i adapter: C0 |
32i RAID adapter
Based on the location of the RAID adapter, select the corresponding routing path for SAS/SATA cable from the following table.
| SAS/SATA cable routing to PCIe riser 1 | SAS/SATA cable routing to PCIe riser 3 |
|---|---|
| |
| Cable | From | To |
|---|---|---|
| 1 | Backplane 1: SAS/SATA | 32i adapter: C0 |
| 2 | Backplane 2: SAS/SATA | 32i adapter: C1 |
| 3 | Backplane 3: SAS/SATA | 32i adapter: C2 |
| NVMe cable routing - backplane 1 | NVMe cable routing - backplane 2 |
|---|---|
| |
| NVMe cable routing - backplane 3 | |
| |
| Cable | From | To | Cable length |
|---|---|---|---|
| 1 | Backplane 1: NVMe 0-1 | System board assembly: NVMe 10 connector | 420 mm |
| 2 | Backplane 1: NVMe 2-3 | System board assembly: NVMe 9 connector | 420 mm |
| 3 | Backplane 1: NVMe 4-5 | System board assembly: NVMe 1 connector | 150 mm |
| 4 | Backplane 1: NVMe 6-7 | System board assembly: NVMe 2 connector | 150 mm |
| 5 | Backplane 2: NVMe 0-1 | System board assembly: NVMe 3 connector | 150 mm |
| 6 | Backplane 2: NVMe 2-3 | System board assembly: NVMe 4 connector | 150 mm |
| 7 | Backplane 2: NVMe 4-5 | System board assembly: NVMe 5 connector | 150 mm |
| 8 | Backplane 2: NVMe 6-7 | System board assembly: NVMe 6 connector | 150 mm |
| 9 | Backplane 3: NVMe 0-1 | System board assembly: NVMe 7 connector | 150 mm |
| 10 | Backplane 3: NVMe 2-3 | System board assembly: NVMe 8 connector | 150 mm |
| 11 | Backplane 3: NVMe 4-5 | System board assembly: NVMe 12 connector | 420 mm |
| 12 | Backplane 3: NVMe 6-7 | System board assembly: NVMe 11 connector | 420 mm |
Give documentation feedback