Parts list
Identify each of the components that is available for your server with the parts list.
Go to Lenovo Data Center Support and navigate to the support page for your server.
Click .
Enter the serial number to view a listing of parts for your server.
It is highly recommended that you check the power summary data for your server using Lenovo Capacity Planner before purchasing any new parts.
T1: Tier 1 customer replaceable unit (CRU). Replacement of Tier 1 CRUs is your responsibility. If Lenovo installs a Tier 1 CRU at your request with no service agreement, you will be charged for the installation.
T2: Tier 2 customer replaceable unit (CRU). You may install a Tier 2 CRU yourself or request Lenovo to install it, at no additional charge, under the type of warranty service that is designated for your server.
F: Field replaceable unit (FRU). FRUs must be installed only by trained service technicians.
C: Consumable and Structural parts. Purchase and replacement of consumable and structural parts (components, such as a filler or bezel) is your responsibility. If Lenovo acquires or installs a structural component at your request, you will be charged for the service.
| Index | Description | Type |
|---|---|---|
For more information about ordering parts:
| ||
| 1 | Front top cover | T1 |
| 2 | Rear top cover | T1 |
| 3 | Air baffle (front) | T1 |
| 4 | Air baffle (rear, 2U standard PHM) | T1 |
| 5 | Air baffle (rear, 1U standard PHM) | T1 |
| 6 | Air baffle (rear, 2U performance PHM) | T1 |
| 7 | 2U performance heat sink and processor carrier | F |
| 8 | 2U standard heat sink and processor carrier | F |
| 9 | 1U standard heat sink and processor carrier | F |
| 10 | Processor | F |
| 11 | Cable management arm | T2 |
| 12 | System I/O board | F |
| 13 | Firmware and RoT security module | F |
| 14 | Management NIC adapter | T1 |
| 15 | OCP module | T1 |
| 16 | OCP module filler | C |
| 17 | Power supply bracket (CRPS) | T1 |
| 18 | PCIe riser cage filler | C |
| 19 | Power supply unit | T1 |
| 20 | Rear wall | F |
| 21 | PCIe riser extender | T2 |
| 22 | PCIe riser cage | T2 |
| 23 | PCIe adapter | T1 |
| 24 | 7mm drive cage | T2 |
| 25 | 7mm drive backplanes | T1 |
| 26 | 7mm drive filler | C |
| 27 | 7mm drive | T1 |
| 28 | PCIe riser card | T2 |
| 29 | PCIe retainer | T1 |
| 30 | Slide rail kit | T2 |
| 31 | 2.5-inch drive filler (8-bay) | C |
| 32 | 2.5-inch drive filler (1-bay) | C |
| 33 | 2.5-inch hot-swap drive | T1 |
| 34 | 2.5-inch drive backplane | T1 |
| 35 | Security bezel | T1 |
| 36 | Mechanical parts kit (power supply key and screws) | T1 |
| 37 | Power supply key (CFFv4) | T1 |
| 38 | Chassis | F |
| 39 | Labels kit (PCIe riser cables) | T1 |
| 40 | M.2 drive | T1 |
| 41 | M.2 drive backplane | T1 |
| 42 | M.2 drive retainer | T1 |
| 43 | Memory module | T1/F 1 |
| 44 | Processor board | F |
| 45 | Flash power module | T1 |
| 46 | MicroSD card | F |
| 47 | CMOS battery (CR2032) | C |
| 48 | Cable 2 | T1 |
| 49 | Power distribution board | T2 |
| 50 | Intrusion switch | T1 |
| 51 | External diagnostics handset | T1 |
| 52 | Fan cage | T1 |
| 53 | Fan | T1 |
| 54 | System service label | T1 |
- 1 For memory modules in memory module slot 1-32 when 2U performance PHM are installed.
- 2 For PCIe riser cable replacement, make sure to order the 39 Labels kit (PCIe riser cables).