Skip to main content

SAS/SATA backplane combinations

Follow the instructions in this section to learn how to do signal cable routing for the combinations with SAS/SATA backplanes.

This configuration contains the following combinations:

Note
The illustrations in this section use the HL PCIe riser as an example for PCIe riser 1 and 3, the routing is the same for the FL PCIe riser.
  • 1 x SAS/SATA backplane
    Follow the instructions in this section to learn how to do cable routing for one SAS/SATA backplane.
  • 2 x SAS/SATA backplanes
    Follow the instructions in this section to learn how to do cable routing for two SAS/SATA backplanes.
  • 3 x SAS/SATA backplanes
    Follow the instructions in this section to learn how to do cable routing for three SAS/SATA backplanes.