Skip to main content

Remove the security bezel

Follow the instructions in this section to remove the security bezel.

Before removing the security bezel:

  1. Read the safety information and installation guidelines (see Safety and Installation Guidelines).

  2. If the server is installed in a rack, slightly slide out or remove the server from the rack.

To remove the security bezel, complete the following steps:

  1. Insert the key that comes with the server and rotate it clockwise to unlock the security bezel to the open position.
    Figure 1. Unlocking the security bezel

  2. Press on the release latch and pivot the security bezel outward to remove it from the chassis.
    Figure 2. Security bezel removal

Demo video

Watch the procedure on YouTube