Install the system board air baffle and the power interposer

Use this procedure to install the system board air baffle and the power interposer.

To install the system board air baffle and the power interposer, complete the following steps:

1. Slightly slide power supply 2 out from the power supply bay (see ).
2. Align the power interposer to the server, and lower it until it sits firmly in place.
   Figure 1. Power interposer installation

   

3. Align the two pairs of nailheads of the system board air baffle to slots, and lower it into the server.
   Attention

   Air baffle is required for airflow that creates proper cooling. Make sure proper air baffles for system configuration is installed before the power is turned on.

   Figure 2. System board air baffle installation