Skip to main content

Remove the processor and memory expansion tray

Use this procedure to remove the processor and memory expansion tray.

Before removing the processor and memory expansion tray:

  1. Read the safety information and installation guidelines (see Safety and Installation Guidelines).

  2. Turn off the server and peripheral devices and disconnect the power cords and all external cables (see Power off the server).

  3. If the server is installed in a rack, remove the server from the rack.

  4. Remove the top cover (see Remove the top cover).

  5. Remove the PCIe expansion tray (see Remove the PCIe expansion tray).

  6. If you are replacing the processor and memory expansion tray, remove the processor and memory expansion tray air baffle, DIMMs (see Remove a memory module), and PHMs (see Remove a processor and heat sink) on the expansion tray.

    Figure 1. Processor and memory expansion tray air baffle removal


    Attention

    Do not remove or install DIMMs and processors on the processor and memory expansion tray when the expansion tray is removed, for the instability might cause damages to components.

To remove the processor and memory expansion tray, complete the following steps:

  1. Disconnect all cables connected to the processor and memory expansion tray.
  2. Slightly pull out power supply 2.
    Attention
    Do not remove the processor and memory expansion tray without physically disconnecting power supply 2.
  3. Grasp the handle of the processor and memory expansion tray; then, pull and rotate it upward to the vertical position. This disengages the expansion tray from the system board.
  4. Grasp the handle and slowly lift the expansion tray from the server; then, set it on a flat surface.
    Figure 2. Processor and memory expansion tray removal

After removing the processor and memory expansion tray:

  • If you are instructed to return the component or optional device, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.

  • If you are planning to recycle the system board, follow the instructions in Disassemble the processor and memory expansion tray for recycle for compliance with local regulations.

Demo video

Watch the procedure on YouTube