Cable routing for drive bay 3
Read this section to learn about cable routing for the drive in bay 3.
Figure 1. Cable routing for drive bay 3
| Cable | From | To |
|---|---|---|
| 1 SATA cable 1 latch (520 mm) | Bay 3 drive signal connector | SATA 3 connector |
| 2 Slim ODD, second 3.5-inch drive and 2.5-inch drive power cable ( 300 mm + 210 mm + 110 mm) | Bay 3 drive power connector | SATA power 1 connector |
Make sure to follow the Cable routing guidelines
in Internal cable routing.
For the system-board connector locations, see System board components.
Give documentation feedback