Install a PCIe adapter

Follow instructions in this section to install a PCIe adapter.

About this task

S002

CAUTION

The power-control button on the device and the power switch on the power supply do not turn off the electrical current supplied to the device. The device also might have more than one power cord. To remove all electrical current from the device, ensure that all power cords are disconnected from the power source.

Attention

• Read Installation Guidelines and Safety inspection checklist to ensure that you work safely.
• Touch the static-protective package that contains the component to any unpainted metal surface on the server; then, remove it from the package and place it on a static-protective surface.

Note

• For a list of the supported PCIe adapters, see Lenovo ServerProven website.

• The PCIe adapter might look different from the illustration.

Procedure

1. Make preparation for this task.
   1. If a bracket is installed in the chassis, open the PCIe adapter retainer bracket and remove the bracket from the chassis. Keep the bracket for future use.
      Figure 1. Removing a PCIe adapter bracket
      
      
   2. Locate the applicable PCIe slot. For more information about the PCIe slots, see Technical specifications.
2. Install the PCIe adapter.
   1. Align the PCIe adapter to the slot; then, gently press both ends of the PCIe adapter until it is securely seated in the slot.
   2. Rotate the PCIe adapter retainer towards the chassis until it snaps into locked position.
      Figure 2. Installing a PCIe adapter
      
      
3. Connect the PCIe adapter cables. For more information on RAID adapter cable routing, see Internal cable routing.