Skip to main content

FQXSPPW2001I : [PowerSupplyElementName] has been removed from container [PhysicalPackageElementName].

[PowerSupplyElementName] has been removed from container [PhysicalPackageElementName].

This message is for the use case when an implementation has detected a Power Supply has been removed.

Severity​

Info

Alert Category​

System - Other

Serviceable​

No

CIM Information​

Prefix:PLAT

and ID:0085

SNMP Trap ID​

22

Automatically Notify Support​

No

User Action​

Complete the following steps:

  1. Ensure one or more DIMMs are installed in the server.
  2. Resolve existing memory errors if they are present.
  3. If no memory fault is recorded in the logs,verify that all DIMM connectors are enabled using the Setup utility or the OneCLI utility.
  4. Reseat all DIMMs ensuring that DIMMs are installed in the correct population sequence, according to the service information for this product.
  5. Clear CMOS memory on system board. Note that all firmware settings will revert to the defaults.
  6. Reflash UEFI firmware.
  7. If problem persists, collect Service Data log.
  8. Contact Lenovo Support.