Skip to main content

FQXSPPW2017I : Power supply [arg1] in the enclosure/chassis (MTM-SN: [arg2])has returned to a normal input state.

Power supply [arg1] in the enclosure/chassis (MTM-SN: [arg2])has returned to a normal input state.

This message is for the use case when an implementation has detected a Power Supply that has input that has returned to normal.

Severity​

Info

Alert Category​

System - Other

Serviceable​

No

CIM Information​

Prefix:PLAT

and ID:0099

Automatically Notify Support​

No

User Action​

Complete the following steps until the problem is solved:

  1. Check the event log of XClarity Controller (XCC) for any fan- or cooling-related issues.
  2. Make sure that the airflow at the front and rear of the chassis is not obstructed and arei n place,clean, and correctly installed.
  3. Make sure that the room temperature is within operating specifications.
  4. If the problem remains and no other DIMMs have the same indication, replace the DIMM.