Skip to main content

LAN Destinations

This section is used to configure the LAN destinations of PEF configuration.

To open the LAN Destinations page, click Settings > Platform Event Filters > LAN Destinations.

By default, all LAN destination slots are displayed, and a maximum of 15 slots are available.

Supported operations on LAN destinations​

LAN Destinations allows you to modify, add, or delete LAN destinations.

  • To delete a configured LAN destination, click Icon for deleting a LAN destination in the upper right corner.

  • To modify a configured LAN destination, click the entry to enter the LAN Destination Configuration page and then modify its configurations.

  • To add a LAN destination, select a free slot to open the LAN Destination Configuration page and then set its configurations.

  • Click Message icon to send sample alerts to the configured destination. Note that test alerts can be sent only with enabled SMTP configuration. This can be done under Settings > SMTP Settings. Make sure that the SMTP server address and port numbers are configured properly.

LAN Destination Configuration​

The LAN Destination Configuration page includes the following configurations.

  • LAN Channel: Displays the LAN channel number for the selected slot, which is read-only.

  • LAN Destination: Displays the destination number of the selected slot, which is read-only.

  • Destination Type: Destination type can be either an SNMP Trap or an E-mail alert.

  • SNMP Destination Address: If Destination Type is SNMP Trap, then provide the IP address of the system that will receive the alert. IPv4 and IPv6 address formats are supported.

  • BMC User Name: If Destination Type is E-Mail, then choose the user to whom the e-mail alert has to be sent.
    Note
    The e-mail address for the user has to be configured under Settings > User Management.

  • Email Subject and Email Message: These fields must be configured if e-mail alert is chosen as the destination type. An e-mail will be sent to the configured e-mail address of the user in case of any severity events with a subject specified in subject field and will contain the message field’s content as the e-mail body. These fields are not applicable for AMI-Format e-mail users.

Click Save to save the changes and return to the LAN destination list.

Click Delete to delete the LAN destination.