Skip to main content

Removing the air baffle

Use this information to remove the air baffle from the server.

Read the safety information in Safety and Installation guidelines.

If you are replacing a server component in the server, you need to turn off the server and peripheral devices, and disconnect the power cords and all external cables.

Attention
The server automatically powers off when the air baffle is removed.

To remove the air baffle, complete the following steps.

  1. Carefully turn the server on its side so that it is lying flat, with the cover facing up.
    Attention
    Do not allow the server to fall over.
  2. Unlock and remove the left-side cover (see Removing the left-side cover).
  3. Remove the air baffle from the server by press the release latches and set it aside.
    Figure 1. Air baffle removal
    Air baffle removal