806f0013-1701xxxx : A diagnostic interrupt has occurred on system [ComputerSystemElementName]. (NMI State)
A diagnostic interrupt has occurred on system [ComputerSystemElementName]. (NMI State)
This message is for the use case when an implementation has detected a Front Panel NMI / Diagnostic Interrupt.
May also be shown as 806f00131701xxxx or 0x806f00131701xxxx
Severity
Error
Alert Category
Critical - Other
Serviceable
Yes
SNMP Trap ID
50
Automatically Notify Support
No
User Response
If the NMI button has not been pressed, complete the following steps: 1. Make sure that the NMI button is not pressed. 2. Replace the operator information panel cable. 3. Replace the operator information panel.
Give documentation feedback