806f010f-2201xxxx : The System [ComputerSystemElementName] encountered a firmware hang. (Firmware Error)
The System [ComputerSystemElementName] encountered a firmware hang. (Firmware Error)
This message is for the use case when an implementation has detected a System Firmware Hang.
May also be shown as 806f010f2201xxxx or 0x806f010f2201xxxx
Severity
Error
Alert Category
System - Boot failure
Serviceable
Yes
SNMP Trap ID
25
Automatically Notify Support
No
User Response
1. Make sure the server meets the minimum configuration to start (see Power-supply LEDs). 2. Update the server firmware on the primary page. Important: Some cluster solutions require specific code levels or coordinated code updates. If the device is part of a cluster solution, verify that the latest level of code is supported for the cluster solution before you update the code. 3. (Trained technician only) Replace the system board.
Give documentation feedback