Skip to main content

Replacing an adapter

Use this information to replace an adapter.

Note

  • If your adapter was previously configured, backup or record its configuration information, if possible, before replacing the adapter. See the documentation for your adapter for information and instructions.

  • If you are replacing a ServeRAID adapter, import your RAID configuration to the replacement adapter as a foreign configuration after you finish the replacement. See the ServeRAID-M Software User Guide for instructions.

  • The following adapters support 10-Gbps transfer rate only:

    • Intel X710 2x10GbE SFP+ Adapter

    • Intel X710 ML2 4x10GbE SFP+ Adapter

    • Intel X710-DA2 ML2 2x10GbE SFP+ Adapter