Skip to main content

Removing the front USB assembly

Use this information to remove the front USB assembly.

Note
The front USB assembly is available only on some models.

To remove the front USB assembly, complete the following steps.

  1. Read the safety information that begins on Safety and Installation guidelines.
  2. Turn off the server and peripheral devices and disconnect the power cords and all external cables, if necessary.
  3. Remove the top cover (see Removing the top cover).
  4. Disconnect the cable on the front USB assembly from the system board.
  5. 1 Pull up the release latch slightly and 2 slide the front USB assembly out of the server.
    Figure 1. Front USB assembly removal
    Front USB assembly removal
  6. If you are instructed to return the front USB assembly, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.