Skip to main content

Removing the rear two hard-disk-drive kit

Use this information to remove the rear two hard-disk-drive kit.

See the Lenovo ServerProven website for a list of hard disk drives that you can use with the server.

To remove the rear two hard-disk-drive kit, complete the following steps:

  1. Read the safety information that begins on page Safety and Installation guidelines.
  2. Turn off the server and peripheral devices, and disconnect the power cord and all external cables.
  3. Remove the top cover (see Removing the top cover).
  4. Grasp the kit at the front and the rear edge and lift it up to remove from the server. Place the kit on a flat, static-protective surface.
    • 2.5-inch rear two hard-disk-drive kit removal
      Figure 1. 2.5-inch rear two hard-disk-drive kit removal
      2.5-inch rear two hard-disk-drive kit removal
    • 3.5-inch rear two hard-disk-drive kit removal
      Figure 2. 3.5-inch rear two hard-disk-drive kit removal
      3.5-inch rear two hard-disk-drive kit removal