Skip to main content

Removing the IBM MAX5 1-node Scalability card

Use this information to remove the IBM MAX5 1-node scalability card from a blade server.

To remove the IBM MAX5 1-node scalability card, complete the following steps.

  1. Before you begin, read Safety and Installation guidelines.
  2. Loosen each screw on the 1-node scalability card, using the provided 3/16" hex driver. Alternate the loosening of each screw until both screws are removed.
  3. Lift the 1-node scalability card off of the blade server and expansion blade and store the card in a safe place.

    Graphic illustrating removal of 1-node scalability card from blade server and expansion blade.