Skip to main content

Remove VRoC key

Follow instructions in this section to remove the VRoC key.

About this task

Attention

  • Read Installation Guidelines and Safety inspection checklist to ensure that you work safely.

  • Power off the server and peripheral devices and disconnect the power cords and all external cables. See Power off the server.

  • Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-sensitive components in their static-protective packages until installation, and handling these devices with an electrostatic-discharge wrist strap or other grounding systems.

Procedure

  1. Remove the rear top cover. See Remove the rear top cover.
  2. Remove riser assembly 1 and 2. See Remove riser 1 assembly (HBA/RAID) and Remove the riser 2 assembly.
  3. Remove the air baffle. See Remove the air baffle.
  4. Remove VRoC key. Remove the key with both hands as illustrated below, and unplug the key gently.
    Figure 1. VRoC key removal

After you finish

If you are instructed to return the component or optional device, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.

Demo video

Watch the procedure on YouTube